Page Title Image

METALCON / October 6-8 / 2021 Tampa

Maximize Your METALCON Experience; And Get the Credit You Deserve

METALCON is pleased to announce that most of the education included in the Total Experience will qualify for Continuing Education Credits (Including: AIA, CSI,ICC and more) Be sure to take advantage of all the education METALCON has to offer. Learn from the industry’s top technical whizzes, business experts, design professionals, and industry insiders. From intensive pre-show workshops to 40+ FREE educational sessions conveniently located inside the exhibit hall, to inspiring Keynotes and Super Sessions, METALCON has it all.  Every attendee will receive certificates of completion for each course.  Credit information for each course will be available in each course description.  Be sure to check back regularly for updated crediting information!

NEW this Year: Earn Valuable Continuing Education Units on the Showfloor!

⮞   We are pleased to announce that METALCON attendees will be eligible for Continuing Education Units. 

⮞   The Total Experience attendees can earn up to 15 ICC Continuing Education Credits (CEUs), 15 AIA Learning Units (LU), including up 5 LU HSW’s.  Certificates can be provided for all other Continuing Education bodies. 

⮞   The Architect’s Experience Attendees can earn up to 18 AIA and 20 CSI Continuing Education Units.


Würth Industry North America

Greenwood,  IN 
United States
  • Booth: 1614

Würth Industry North America (WINA) is a division of the Würth Group, the world’s largest fastener distribution company. We are the premier distributor of supply chain solutions, delivering C-Parts, specialty products, MRO, safety equipment, engineering assistance, inventory management, vending machines, kitting and assembly, and 3D printed parts.


  • 3M™ Cut & Grind Wheel
    These versatile wheels serve as both a depressed center grinding wheel and a cut-off wheel, allowing you to seamlessly switch from cutting applications....

    • Versatile, rigid reinforced resin-bonded wheel can be used as both a grinding wheel and cut-off wheel
    • Powered by 3M Precision-Shaped Grain for a fast cut and long abrasive life
    • 3M Advanced Series Abrasives deliver a great combination of performance and value
    • Designed for cutting and grinding on mild steel and stainless steel
    • Cuts and grinds with less pressure than traditional wheels, helping to reduce operator fatigue
  • Structural Steel GEN3SYS® XT Pro
    The GEN3SYS XT Pro Structural Steel insert is the optimal solution for beam and plate holemaking in the structural steel industry....

  • Allied’s XT Pro product line continues to excel in high penetration drilling and provides you with an optimal solution to your toughest demands. The upgraded carbide insert has been completely redesigned to improve your throughput and cut operational costs by extending life and increasing penetration rates. The XT Pro structural insert is designed to run most effectively in our GEN3SYS XT structural steel holder.

    • Specifically designed for the Structural Steel Industry
    • Superior chip formation, life, and toughness required for harsh drilling applications
    • Optimal tool life using our AM420 insert coating
    • Inserts are stocked in common structural steel hole sizes
    • Available in 3xD, 5xD, and 7xD lengths
  • 3M™ DBI-SALA® Fixed Ladder SRL Anchor
    At under 30 lbs., this lightweight solution adds a convenient tie-off point to existing ladders, helping you meet OSHA’s walking-working surfaces standard....

  • Ideal fall protection solution for step-through style fixed ladder systems.

    Easy to Transport

    • Under 30 lbs. for ease of transport and installation.

    Simple Setup

    • Installs on the ladder in 5 minutes or less.

    Versatile Installation

    • The ladder anchor can be mounted to the front or behind the ladder with left, right or center alignments.

    Compatible with Your Existing Fall Protection Harness

    • Unlike a fixed cable system, this solution doesn’t require a front D-ring, which can reduce overall implementation costs.

    Designed for Durability

    • Available in galvanized or stainless steel.

    Compliance comes standard.

    • Meets 29 CFR OSHA 1910 Walking Working Surfaces Section 1910.27.
  • 3M™ DBI-SALA® Lad-Saf™ Flexible Vertical Cable
    The new generation of Lad-Saf Systems are re-engineered to simplify and speed up the installation process....

  • Adding or upgrading your vertical safety systems just got easier. The new generation of Lad-Saf Systems are re-engineered to simplify and speed up the installation process. With up to 72% fewer loose components* than some of our previous models, these lightweight systems are streamlined for easy installation and maintenance on a variety of structures—such as fixed ladders and telecommunication towers. They have also been designed to meet the requirements of the new ANSI Z359.16 standard when used with our Lad-Saf X2 or X3 sleeve, helping you to stay in compliance with the current fall protection standards.

    Convenient: Integrated fall arrest-rated anchor point.

    Fast: Installation is easy with fewer loose parts and more robust cable tensioning and termination as compared to our previous systems.

    New Pre-Swaged Cable Termination: Durable, high-strength steel construction that allows for easy installation and maintenance-free longevity.

    Flexible: Mounting brackets can be used on a variety of fixed ladder styles that may consist of different rung spacings and shapes.

    Simple: Most configurations use fewer than 13 separate components—up to 72% less than some of our previous models.

    Light: Total system weighs less than our previous 2- and 4-user systems.

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".